0333 121 1215
Your Basket
You don't have any
courses in your basket.
The following courses have unfortunately been fully booked since they were added to your basket.
These have now been removed from your basket.
The following course's available spaces have unfortunately reduced below what you originally requested.
These have now been automatically updated in your basket.
If these changes cause any issues, you can contact our team to discuss your options.
Our opening hours are Monday - Thursday 8:30am - 5:30pm | Friday 8:30am - 5:00pm
 info@ppltraining.co.uk  0333 121 1215
Mechanical & Electrical
Safe Systems of Work
Mechanical & Electrical
Technical
Legionella
(Water Hygiene)
HTM Healthcare
Estates & Facilities
F-Gas Handling
(Fluorinated Gases)
Fire Safety
CONTACT US
 0333 121 1215  info@ppltraining.co.uk

Electrical to Mechanical Conversion (EMC)

£1,375 + VAT
5 Days
York,   Slough and Livingston.
Course Overview
This City & Guilds Assured course will enable you to gain a basic knowledge of mechanical principles and concepts, as well as an understanding of mechanical plant operation and isolation requirements of plant and pressure systems.
Who is This Course For?
This course is aimed at staff working within a Mechanical & Electrical environment who would benefit from increased awareness of mechanical principles and practices as part of their current role. It also provides a foundation course for those likely to undertake other mechanical courses.
Course Dates
Start Date End Date Location Price (Ex. Vat)
Mon, 20th July 2026 End Date: Fri, 24th July 2026 Slough £ 1,375 | Slough
Mon, 10th August 2026 End Date: Fri, 14th August 2026 York £ 1,375 | York
Mon, 17th August 2026 End Date: Fri, 21st August 2026 Slough £ 1,375 | Slough
Mon, 24th August 2026 End Date: Fri, 28th August 2026 Livingston £ 1,375 | Livingston
Mon, 7th September 2026 End Date: Fri, 11th September 2026 York £ 1,375 | York
Mon, 14th September 2026 End Date: Fri, 18th September 2026 Slough £ 1,375 | Slough
Mon, 21st September 2026 End Date: Fri, 25th September 2026 Livingston £ 1,375 | Livingston
Mon, 19th October 2026 End Date: Fri, 23rd October 2026 Slough £ 1,375 | Slough
Mon, 26th October 2026 End Date: Fri, 30th October 2026 Livingston £ 1,375 | Livingston
Mon, 9th November 2026 End Date: Fri, 13th November 2026 York £ 1,375 | York
Mon, 16th November 2026 End Date: Fri, 20th November 2026 Slough £ 1,375 | Slough
Mon, 23rd November 2026 End Date: Fri, 27th November 2026 Livingston £ 1,375 | Livingston
Mon, 7th December 2026 End Date: Fri, 11th December 2026 York £ 1,375 | York
Mon, 14th December 2026 End Date: Fri, 18th December 2026 Slough £ 1,375 | Slough

Schedule
Day Morning Afternoon
One
  • Introduction
  • Mechanical Engineering Physics & Principles
  • Outline Structure of UK Legislation
  • Valve Types & Their Application
Two
  • Introduction to Various Pump Types
  • Valve & Pumps Practical Session
  • Drives, Gear & Bearings
  • Drive Alignment Practical Session
Three
  • Refrigeration Principles
  • Refrigeration Practical Session
  • Introduction to Air Conditioning
  • Introduction to Internal Combustion Engines
  • Compressed Air Systems
Four
  • Mechanical Measurement
  • Mechanical Measurement Practical
  • Fire Protection Systems
  • Introduction to Boiler Plant
  • Safe Systems of Work & Isolation Methodology
Five
  • Commissioning & Re-Instatement
  • Documentation
  • Review
  • Assessment(s)
Key Learning Areas
  • Key aspects of UK legislation
  • Fundamental mechanical principles, including heat transfer, fuels and combustion
  • Pumps, systems and components including valve types and heat exchangers
  • Refrigeration and air conditioning systems
  • Pressure plant including steam
  • Hot water plant and water treatment
  • Compressed air plant and hydraulic systems
  • Plant operating procedures - start up and shut down
  • Fire protection and shutdown systems associated with mechanical installations
  • Maintenance strategies and procedures
What you need...
Everything you require for this course is provided
Related Courses
Next Steps
On successful completion, we recommend the following training courses to continue your learning path:
Mechanical to Electrical Conversion Authorised Person Mechanical and Pressure Systems
Request More Information
We'll never share your details with anyone else.